Altistart 01 Soft Starters Page 15 Specifications

15 Altistart 01 & U01 soft starters for asynchronous motors Connections Specifications Connections (maximum connection capacity and tightening torque) ATS01N1 pppp Type of Soft Starter ATS01N1 03FT/06FT 09FT/112FT Power circuit Cage type connector Connection onto 4 mm screw terminals Stranded wire without cable end 1 conductor 2.5 mm 2 (14 AWG) 1.5 - 10 mm 2 (16 - 8 AWG) 2 conductors 1 mm 2 (18 AWG) 1.5 - 6 mm 2 (16 - 10 AWG) Stranded wire with cable end 1 conductor 2.5 mm 2 (14 AWG) 1 - 6 mm 2 (18 - 10 AWG) 2 conductors 0.75 mm 2 (18 AWG) 1 - 6 mm 2 (18 - 10 AWG) Solid wire 1 conductor 2.5 mm 2 (14 AWG) 1 - 10 mm 2 (18 - 8 AWG) 2 conductors 1 mm 2 (18 AWG) 1 - 6 mm 2 (18 - 10 AWG) Tightening torque 0.8 N p m (7 in-lb) 1.9 - 2.5 N p m (16.9 - 22.1 in-lb) Control circuit Cage type connector Screw connector Stranded wire without cable end 1 conductor 2.5 mm 2 (14 AWG) 0.5 - 2.5 mm 2 (20 - 14 AWG) 2 conductors 1 mm 2 (18 AWG) 0.5 - 1.5 mm 2 (20 - 16 AWG) Stranded wire with cable end 1 conductor 2.5 mm 2 (14 AWG) 0.5 - 1.5 mm 2 (20 - 16 AWG) 2 conductors 0.75 mm 2 (18 AWG) 0.5 - 1.5 mm 2 (20 - 16 AWG) Solid wire 1 conductor 2.5 mm 2 (14 AWG) 0.5 - 2.5 mm 2 (20 - 14 AWG) 2 conductors 1 mm 2 (18 AWG) 0.5 - 1 mm 2 (20 - 18 AWG) Tightening torque 0.8 N p m (7 in-lb) 0.5 N p m (4.43 in-lb) ATS01N2 pppp and ATSU01N2 pppp A customized power connector is supplied with the ATSU01N2 pp LT soft starters. It eliminates the need for power wiring between the soft starter and the TeSys U-Line motor starter and minimizes the height of the assembly when the two units are mounted one above the other. For ATS01N2 pp LU/QN/RT soft starters, the power connector is available as an option ( VW3G4104 ). Power circuit Connection onto 4 mm screw terminals Stranded wire without cable end 1 conductor 1.5 - 10 mm 2 (16 - 8 AWG) 2 conductors 1.5 - 6 mm 2 (16 - 10 AWG) Stranded wire with cable end 1 conductor 1 - 6 mm 2 (16 - 10 AWG) 2 conductors 1 - 6 mm 2 (16 - 10 AWG) Solid wire 1 conductor 1 - 10 mm 2 (16 - 8 AWG) 2 conductors 1 - 6 mm 2 (16 - 10 AWG) Tightening torque 1.9 - 2.5 N p m (16.9 - 22.1 in-lb) Control circuit Screw connector Stranded wire without cable end 1 conductor 0.5 - 2.5 mm 2 (20 - 14 AWG) 2 conductors 0.5 - 1.5 mm 2 (20 - 16 AWG) Stranded wire with cable end 1 conductor 0.5 - 1.5 mm 2 (20 - 16 AWG) 2 conductors 0.5 - 1.5 mm 2 (20 - 16 AWG) Solid wire 1 conductor 0.5 - 2.5 mm 2 (20 - 14 AWG) 2 conductors 0.5 - 1 mm 2 (20 - 18 AWG) Ground connection (ATSU01N2 pp LT only) Tinned connector. Fixed using 6 screws Tightening torque 0.5 N p m (4.4 in-lb)

Previous Page
Next Page