Altistart 22 Enclosed Altistart 22 Soft Starters Page 21 Accessories and Options

21 Altistart 22 soft starters for asynchronous motors Accessories Accessories & Options Remote display terminal This terminal enables the human machine interface of the Altistart 22 to be positioned remotely on the door of a floor-standing enclosure. It has IP 54/NEMA 12 or IP 65 degree of protection depending on the model. Maximum operating temperature is 122 F (50 C). It is used to: Set and configure the Altistart 22 remotely Display the status and detected faults of the Altistart 22 remotely Description Degree of protection Length Dimensions Part number Weight ft m in mm lbs kg Remote display terminals Remote-mounting cordset required IP 54/ NEMA 12 - - 2 x 0.6 x 2.8 50 x 15 x 70 VW3G22101 0.7 0.3 IP 65 - - 2.6 x 0.7 x 4.2 66 x 19 x 106 VW3G22102 0.7 0.3 Remote-mounting cordsets equipped with 2 RJ45 connectors - 3.3 1 - VW3A1104R10 0.2 0.1 - 9.8 3 - VW3A1104R30 0.4 0.2 Remote display terminal 4 2 2 1 3 ATS 22 4 Example of a connection using a Modbus serial link (1) via a splitter box with RJ45 connectors Configuration tools (continued) Modbus serial link Connection via splitter box and RJ45 connectors Description Number Length Part number Weight ft m lbs kg Modbus splitter box with 10 RJ45 connectors 1 - - LU9GC3 1.1 0.5 Cordsets for Modbus serial link with 2 RJ45 connectors 2 1 0.3 VW3A8306R03 0.06 0.03 3 1 VW3A8306R10 0.2 0.1 10 3 VW3A8306R30 0.22 0.1 Modbus T-junction boxes (with integrated cable) 3 1 0.3 VW3A8306TF03 0.4 0.2 3 1 VW3A8306TF10 0.4 0.2 Line terminators (2) (3) R = 120 & C = 1 nf 4 - - VW3A8306RC 0.02 0.01 R = 120 & 4 - - VW3A8306R 0.02 0.01 (1) Cable depends on the type of controller or PLC (2) Sold in lots of 2 (3) Depends on the bus architecture

Previous Page
Next Page