Altistart 22 Enclosed Altistart 22 Soft Starters Page 9 Specifications

9 Altistart 22 soft starters for asynchronous motors Environmental specifications Type of starter ATS22D17S6U...ATS22C59S6U ATS22D17S6...ATS22C59S6 ATS22D17Q...ATS22C59Q Conforming to standards Altistart 22 soft starters conform to the strictest international standards and recommendations relating to electrical industrial control devices, in particular the standard IEC 60947-4-2 and the RoHS Directive. Electromagnetic compatibility EMC Conducted and radiated emissions IEC 60947-4-2, class A Electrostatic discharge IEC 61000-4-2 level 3 Immunity to radiated radio- frequency electromagnetic field IEC 61000-4-3 level 3 Immunity to electrical transients IEC 61000-4-4 level 4 Surge immunity IEC 61000-4-5 level 3 Damped oscillating waves IEC 61000-4-12 level 3 e marking The soft starts are e marked on the basis of European directives governing low voltage (72/73/EEC) and EMC (89/336/EEC). Product certifications CCC, CSA, C-Tick, GHOST, UL Degree of protection For ATS22D17...C11 IP 20 (IP 00 if no connections) For ATS22C14...C59 IP 00 Maximum ambient pollution Level 2 Conforming to IEC/EN 60664-1 Vibration resistance 1.5 mm from 2 to 13 Hz, 1 gn from 13 to 200 Hz Conforming to IEC/EN 60068-2-6 Shock resistance 15 gn for 11 ms Conforming to IEC 60068-2-27 Relative humidity 95% non-condensing, no dripping water Conforming to IEC/EN 60068-2-3 Ambient air temperature around the device Storage F -13158 F (-25...70 C) conforming to IEC/EN 60947-4-2 Operation F 14 F (-10 C) to 104 F (40 C) without derating, up to 140 F (60 C) with current derating of 2.2% per degree above 104F (40 C) Maximum operating altitude ft 3300 ft (1000 m) without derating Above this, derate the nominal current by 2.2% per additional 330 ft (100 m) to a maximum of 6600 ft (2000 m) Operating position Maximum permanent angle in relation to the normal vertical mounting position 10 10 Environmental & Electrical Specifications

Previous Page
Next Page