Altivar 212 Variable Speed Drives Page 17 Selection Tables

17 Altivar 212 variable speed drives Selection Table IP 21 drives IP 21 drives (frequency range from 0.5 to 200 Hz) Motor Line supply Altivar 212 Power Line current (1) Maximum prospective line Isc Max. continuous output current (In) (2) Maximum transient current for 60 s Dissipated power at maximum output current THDI (3) Part number Frame size Weight 200 V 240 V 230 V 240 V HP kW A A kA A W % lbs kg Three-phase supply voltage: 200240 V 50/60 Hz, without EMC filter (4) 1 0.75 3.3 2.7 5 4.6 5.1 63 31.3 ATV212H075M3X 1 4.0 1.8 2 1.5 6.1 5.1 5 7.5 8.3 101 31.6 ATV212HU15M3X 1 4.0 1.8 3 2.2 8.7 7.3 5 10.6 11.7 120 30.7 ATV212HU22M3X 1 4.0 1.8 - 3 - 10 5 13.7 15.1 146 32.4 ATV212HU30M3X 2 6.7 3.1 5 4 14.6 13 5 18.7 19.3 193 31.1 ATV212HU40M3X 2 6.7 3.1 7.5 5.5 20.8 17.3 22 24.2 26.6 249 30.7 ATV212HU55M3X 3 13.5 6.1 10 7.5 27.9 23.3 22 32 35.2 346 30.8 ATV212HU75M3X 3 13.5 6.1 15 11 42.1 34.4 22 46.2 50.8 459 35.5 ATV212HD11M3X 4 25.4 11.5 20 15 56.1 45.5 22 61 67.1 629 33.3 ATV212HD15M3X 4 25.4 11.5 25 18.5 67.3 55.8 22 74.8 82.3 698 32 ATV212HD18M3X 4 25.4 11.5 30 22 80.4 66.4 22 88 96.8 763 35 ATV212HD22M3X 5 60.6 27.4 40 30 113.3 89.5 22 117 128.7 1085 32.1 ATV212HD30M3X 7 85.4 38.7 380 V 480 V (5) 380 V HP kW A A kA A W % lbs kg Three-phase supply voltage: 380480 V 50/60 Hz, with integrated category C2 or C3 EMC filter 1 0.75 1.7 1.4 5 2.2 2.4 55 32.8 ATV212H075N4 1 4.4 2.0 2 1.5 3.2 2.5 5 3.7 4 78 30.9 ATV212HU15N4 1 4.4 2.0 3 2.2 4.6 3.6 5 5.1 5.6 103 30.5 ATV212HU22N4 1 4.4 2.0 - 3 6.2 4.9 5 7.2 7.9 137 31.2 ATV212HU30N4 2 7.4 3.4 5 4 8.1 6.4 5 9.1 10 176 30.6 ATV212HU40N4 2 7.4 3.4 7.5 5.5 10.9 8.6 22 12 13.2 215 30.5 ATV212HU55N4 2 7.4 3.4 10 7.5 14.7 11.7 22 16 17.6 291 30.9 ATV212HU75N4 3 14.2 6.5 15 11 21.1 16.8 22 22.5 24.8 430 30.4 ATV212HD11N4 3 14.2 6.5 20 15 28.5 22.8 22 30.5 33.6 625 30.9 ATV212HD15N4 4 25.7 11.7 25 18.5 34.8 27.8 22 37 40.7 603 30.5 ATV212HD18N4 4 25.7 11.7 30 22 41.1 32.6 22 43.5 47.9 723 31.9 ATV212HD22N4S 4 25.7 11.7 30 22 41.6 33.1 22 43.5 47.9 626 30.7 ATV212HD22N4 5 58.3 26.4 40 30 56.7 44.7 22 58.5 64.4 847 30 ATV212HD30N4 5 58.3 26.4 50 37 68.9 54.4 22 79 86.9 976 30.3 ATV212HD37N4 6 84.0 38.1 60 45 83.8 65.9 22 94 103.4 1253 30.2 ATV212HD45N4 6 84.0 38.1 75 55 102.7 89 22 116 127.6 1455 32.7 ATV212HD55N4 7 122.1 55.4 100 75 141.8 111.3 22 160 176 1945 31.1 ATV212HD75N4 7 122.1 55.4 Dimensions (overall) Frame size W x H x D EMC plate mounted EMC plate not mounted inches mm inches mm 1 4.2 x 7.6 x 5.9 107 x 192 x 150 4.2 x 5.6 x 5.9 107 x 143 x 150 2 16.2 x 9.1 x 5.9 142 x 232 x 150 16.2 x 7.2 x 5.9 142 x 184 x 150 3 7.1 x 12.1 x 6.7 180 x 307 x 170 7.1 x 9.1 x 6.7 180 x 232 x 170 4 9.6 x 15.9 x 7.5 245 x 405 x 190 9.6 x 13 x 7.5 245 x 330 x 190 5 9.4 x 21.3 x 8.4 240 x 542 x 214 9.4 x 16.5 x 8.4 240 x 420 x 214 6 9.4 x 26.1 x 9.6 240 x 663 x 244 9.4 x 21.7 x 9.6 240 x 550 x 244 7 12.6 x 28.5 x 11.4 320 x 723 x 290 12.6 x 23.8 x 11.4 320 x 605 x 290 (1) Typical value for the indicated motor power and for the maximum prospective line Isc. (2) Values given for nominal switching frequency of 12 kHz up to ATV212HD15M3X and up to ATV212HD15N4 or 8 kHz for ATV21HD18M3XHD30M3X and ATV212HD18N4HD75N4, for use in continuous operation. Switching frequency can be set between 6 and 16 kHz for all ratings. Above 8 kHz or 12 kHz, depending on the rating, drives will reduce switching frequency automatically in the event of an excessive temperature rise. For continuous operation above the nominal switching frequency, derate nominal drive current. Nominal motor current must not exceed this derating value. See the derating curves on our website www.schneider-electric.com. (3) Total current harmonic distortion in accordance with IEC/EN 61000-3-12. (4) Drives are supplied with an EMC plate, for customer assembly. (5) Value given at 380 V (IEC)/460 V (NEC). (6) with integrated EMC filter C2, C3 (7) with integrated C1 EMC filter for UL Type 12/IP55 products ATV212W pppppp ATV 212H075M3X EMC plate not mounted ATV 212HD55N4 EMC plate not mounted ATV 212HD15N4 EMC plate not mounted ATV212 H W 0 pp U pp D pp M3X N4 N4C Product Family Altivar 212 Degree of Protection H - IP21 product W - Type 12/IP55 product Power Range (kW) 0 pp = 0.01 x pp (075 = 0.01 x 75 = 0.75 kW) U pp = 0.1 x pp (U75 = 0.1 x 75 = 7.5 kW) D pp = 1.0 x pp (D75 = 1.0 x 75 = 75 kW) Supply Voltage M3X = 200 - 240 V three-phase N4 = 380 - 480 V three-phase (6) N4C = 380 - 480 V three-phase (7) Part Number Explanation

Previous Page
Next Page