Altivar 212 Variable Speed Drives Page 22 Accessories and Options

22 Altivar 212 variable speed drives Accessories & Options Communication networks The Altivar 212 drive is designed to suit the configurations found in communicating installations created for buildings (HVAC) (1) . It is easily integrated in building management systems thanks to its integrated communication protocols. In addition, the LonWorks communication card offered as an option provides the user with an open and interoperable system. The Altivar 212 drive integrates a standard card which supports the Modbus, METASYS N2, APOGEE FLN P1 and BACnet communication protocols. For optimum management flexibility, two communication ports located on the front of the drive (with the door open) enable simultaneous connection to a communication network and an HMI terminal. The Altivar 212 drive has been designed to simplify connections to communication networks by offering directly accessible connections: An RJ45 communication port for the Modbus serial link: This network port is mainly assigned to the remote graphic display keypad (Drive Navigator). It is also used to connect: The Multi-Loader configuration tool The Bluetooth serial link A Magelis industrial HMI terminal iPad with appropriate adapter cable A screw terminal block for Modbus, METASYS N2, APOGEE FLN P1 and BACnet networks (optimized solution for daisy chain connection).This screw terminal block is assigned to control and signalling by a PLC or by another type of controller. Description Item no. Length Part number Weight ft m lbs kg Connection accessories for Modbus serial link (optimized solution for daisy chain connection) RS 485 double shielded twisted pair Modbus cable Supplied without connector (1) 328.1 100 TSXCSA100 - - Modbus drop cable 1 RJ45 connector and one stripped end (2) 9.8 3 VW3A8306D30 0.3 0.2 Line termination for screw terminals (3) R = 120 W C = 1 nf (3) - VW3A8306DRC 0.4 0.2 R = 150 W (3) - VW3A8306DR 0.4 0.2 Other connection accessories for Modbus serial link Modbus splitter box 10 RJ45 connectors and 1 screw terminal block (1) - LU9GC3 1.1 0.5 Cordsets for Modbus serial link equipped with 2 RJ45 connectors (2) 1.0 0.3 VW3A8306R03 0.1 0.1 3.3 1 VW3A8306R10 0.1 0.1 9.8 3 VW3A8306R30 0.3 0.1 Modbus T-junction boxes with integrated cable (3) 1.0 0.3 VW3A8306TF03 0.4 0.2 3.3 1 VW3A8306TF10 0.5 0.2 Line terminator (3) for RJ45 connector R = 120 W C = 1 nf (4) - VW3A8306RC 0.1 0.1 R = 150 W - VW3A8306R 0.02 0.01 Magelis XBT ATV 212 ATV 61 Modbus serial link Example of configuration on the Modbus serial link ATV 212 M168 logic controller ATV 212 2 1 3 Modbus serial link Optimized solution for daisy chain connection to the Modbus serial link (2) M168 logic controller Connection via splitter box with RJ45 connectors on Modbus serial link ATV 212 4 2 1 2 3 3 4 3 Modbus serial link (2) M168 logic controller Remote mounting accessories for RJ45 connection with IP 55 degree of protection 2 1 RJ45 connection accessories with IP 55 degree of protection Internal IP 55 cable equipped with an RJ45 connector and an IP 55 RJ45 base. For remote location of the drive's RJ45 port while maintaining IP 55 protection (5) 1.0 0.3 VW3A01500 0.1 0.1 2.0 0.6 VW3A01502 0.1 0.1 IP 55 cordsets equipped with an RJ45 connector and an IP 55 RJ45 base. They can be used to connect a drive equipped with a VW3A0150 p cable (6) 9.8 3 VW3A01501 0.3 0.13 (1) Heating, Ventilation and Air Conditioning. (2) Cable dependent on the type of controller or PLC. (3) Sold in lots of 2.

Previous Page
Next Page