Altivar 32 Variable Speed Drives Page 10 Specifications

10 Altivar 32 variable speed drives Electrical specifications Voltage and hp range 200 -15% to 240 +10%, single-phase input, three-phase output, 0.25 hp to 3 hp 380 -15% to 480 +15%, three-phase input, three-phase output, 0.5 hp to 20 hp Frequency input range Hz 47.5 to 63 Frequency output range Hz 0.1 to 599 Switching frequency range kHz 2 to 16 adjustable Speed range 1 to 100 for asynchronous motors Motor protection Class 10 electronic overload protection Motor control profiles For asynchronous motors: sensorless flux vector, volts/hertz, 5 point volts/hertz, quadratic volts/hertz motor control For synchronous motors in open loop: permanent magnet motor control Transient over current 150% nominal for 60 s, 200% nominal for 2 s Embedded functions 150 functions, safety functionality, Altivar logic functions EMC filter Integrated Class 2 EMC filter for radiated and conducted emissions, IEC 61800-3 (environments 1 and 2, category C2) Communication Embedded Bluetooth for SoMove PC software. Embedded RJ45 port for Modbus, CANopen, Simple loader, Multi-Loader, SoMove PC software or remote keypad connection User interface On board 4 digit, 7 segment LED display with navigation wheel and ESC key. Option for remote keypads Compliance RoHS, WEEE (Waste Electrical and Electronic Equipment) e marked according to the European low voltage (2006/95/EC) and EMC (2004/108/EC) directives. Certifications UL 508C, CSA, C-Tick, NOM, GOST, e , UL File E116875 ISO/EN 13849 -1/-2 category 3 (PLd) EN 954-1 category 1 and IEC/EN 61508 SIL 1 stopping category 0 per IEC/EN 60204-1 without additional components EN 954-1 category 3 and IEC/EN 61508 SIL 2 stopping category 0 per IEC/EN 60204-1 with Preventa safety module IEC 61800-5-1, Adjustable Speed electrical power drive systems IEC 61800-5-2, Ed.1 "Adjustable speed electrical power drive systems - Part 5-2: Safety requirements - Functional". Electrical & Environmental Specifications Environmental specifications Temperature ratings 14 to 122 F (-10 to +50 C) operational without de-rating, up to 140 F(60 C) with de-rating Altitude ratings Up to 3300 ft (1000 meters) without de-rating, de-rate nominal current by 1% for each additional 330 ft (100 m) up to 10,000 ft (3000 m) Humidity up to 95% non-condensing, IEC 60068-2-3 Pollution degree 2 conforming to EN/IEC 61800-5-1. Conformal coating per IEC 60721-3-3 classes 3C2 and 3S2. Degree of protection IP20 conforming to EN/IEC 61800-5-1 Vibration resistance 1 gn (f=13...200 hz) conforming to EN/IEC 60068-2-6 1.5 mm peak to peak (f=3...13 hz) conforming to EN/IEC 60068-2-6 Shock resistance 15 gn for 11 ms conforming to EN/IEC 60068-2-27 Noise level 43 dB conforming to 86/188/EEC

Previous Page
Next Page