Altivar 32 Variable Speed Drives Page 12 Specifications

12 Altivar 32 variable speed drives I/O & Control Specifications I/O & Control specifications (continued) Terminal Function Type Specifications AO1 Voltage or current analog output (collector) O Analog output 0 to 10 V, min. load impedance 470 or Analog output 0 to 20 mA, max. load impedance 800 Resolution: 10 bits Precision: v 1% in 50/60Hz for 77 F (25 C) 50 F (10 C) v 2% in 50/60Hz for 14 F (-10 C) to 140 F (60 C) Linearity: 0.3% Sampling time: 2 ms LO+ LO- Logic output O Open collector output configurable as sink or source using SW1 switch Refresh time: 2 ms Maximum current: 100 mA Maximum voltage: 30 V R1A N.O. contact of the relay O Min. switching capacity: 5 mA for 24 V c Max. switching capacity on resistive load: (cos = 1) 3 A for 250 V a and 4 A for 30 V c Max. switching capacity on inductive load: (cos = 0.4, L/R =7 ms): 2 A for 250 V a , 30 V c Refresh time: 2 ms Service life: 100,000 operations at max. switching power R1B N.O. contact of the relay O R1C Common point contact of programmable relay R1 O R2A R2C NO contact of programmable relay R2 O Min. switching capacity: 5 mA for 24 V c Max. switching capacity on resistive load: (cos = 1) 5 A for 250 V a and 30 V c Max. switching capacity on inductive load: (cos = 0.4, L/R = 7 ms): 2 A for 250 V a , 30 V c Refresh time: 2 ms Service life: v 100,000 operations at max. switching power v 1,000,000 operations with 500 mA current to inductive load 58 Vac or 30 Vdc RJ45 port Communication port - It is used to connect: a PC using SoMove software a graphic or LED keypad Modbus or CANopen network Configuration loader tools

Previous Page
Next Page