Altivar 32 Variable Speed Drives Page 6 Introduction

6 Altivar 32 variable speed drives Product Introduction Product (continued) External accessories and options External accessories and options are available with the Altivar 32 drive. The type of external accessories and options depends on the drive rating. Accessories Bracket for direct mounting of a GV2 self-protecting disconnect to the Altivar 32 Frame A or B. (see page 19) Adaptor for mounting the control module at 90, for mounting the power module on its side, for Frame A and B, allowing side mounting the Altivar 32 for accommodating shallow cabinets. Daisy chain DC bus cordsets for daisy chain connection of the DC bus See page 19. External options Braking resistors Line chokes Motor chokes Additional EMC filters See pages 23 to 26. HMI and configuration tools On-board Human/Machine Interface The 4-digit display 1 displays drive states, detected faults and parameter values. The navigation button 2 is used to navigate through the menus, modify values and change the motor speed in local mode. HMI terminals The Altivar 32 drive can be connected to a remote display terminal 4 or a remote graphic display terminal 3 , which are available as options. The remote display terminal can be mounted on an enclosure door with IP 54 or IP 65 degree of protection. It provides access to the same functions as the Human/Machine Interface. The remote graphic display terminal, with its text display in the user's language, provides a user-friendly interface for configuration, debugging or maintenance. It can also be mounted on an enclosure door with IP 54 or IP 65 degree of protection. See page 20. SoMove setup software for PCs SoMove setup software is used to configure, adjust, debug (using the Oscilloscope function) and maintain the Altivar 32 drive in the same way as for other Schneider Electric drives and starters. It can be used with a direct cable connection or a Bluetooth wireless connection. See page 22. Simple Loader and Multi-Loader configuration tools The Simple Loader tool 6 enables the configuration from one powered-up drive to be duplicated on another powered-up drive. The Multi-Loader tool 5 enables configurations from a PC or drive to be copied and duplicated on another drive; the drives do not need to be powered up when using the Multi-Loader tool. See page 22. Electromagnetic compatibility (EMC) The built-in EMC filters in ATV32H ppp M2 and ATV32H ppp N4 drives, and compliance with EMC requirements simplify installation and help ensure these devices meet the criteria for the e mark. This enables compliance with standard IEC 61800-3, category C2 for a maximum motor cable length of 32.8 feet (10 meters). This filter can be disconnected by removing a jumper, if EMC filtering is undesirable. Other filters are available as an option and can be installed by the customer to reduce the level of emissions from Altivar 32 drives. See page 26. GV2/Altivar 32 direct mounting SoMove setup software Description of the multiple ATV 32 HMI and configuration tools 1 2 3 4 5 6

Previous Page
Next Page