Altivar 320 Variable Speed Drives Page 60882-2 Variable speed drives

2 References Variable speed drives Altivar Machine ATV320 Drives with compact control block Drives with compact control block (1) Motor Line supply Altivar Machine ATV320 Power indicated on rating plate (2) Max. line current (3) (4) Apparent power Max. prospec- tive line Isc (5) Max. continuous output current (In) (2) Max. transient current for 60s Power dissipated at maximum output current (In) (2) Reference (2) Weight at U1 at U2 at U2 kW HP A A kVA kA A kg / lb Single-phase supply voltage: 200240 V 50/60 Hz, with integrated EMC filter (4) (6) (7) 0.18 0.25 3.4 2.8 0.7 1 1.5 2.3 21.7 ATV320U02M2C 0.800/ 1.278 0.37 0.5 5.9 4.9 1.2 1 3.3 5 32.2 ATV320U04M2C 1.000/ 2.204 0.55 0.75 7.9 6.6 1.6 1 3.7 5.6 41.7 ATV320U06M2C 1.100/ 2.425 0.75 1 10 8.4 2 1 4.8 7.2 48.3 ATV320U07M2C 1.100/ 2.425 1.1 1.5 13.8 11.6 2.8 1 6.9 10.4 65.6 ATV320U11M2C 1.600/ 3.527 1.5 2 17.8 14.9 3.6 1 8 12 82.4 ATV320U15M2C 1.600/ 3.527 2.2 3 24 20.2 4.8 1 11 16.5 109.6 ATV320U22M2C 1.600/ 3.527 Three-phase supply voltage: 380500 V 50/60 Hz, with integrated EMC filter (4) (6) (7) 0.37 0.5 2.1 1.6 1.4 5 1.5 2.3 28 ATV320U04N4C 1.200/ 2.646 0.55 0.75 2.8 2.2 1.9 5 1.9 2.9 33 ATV320U06N4C 1.200/ 2.646 0.75 1 3.6 2.8 2.4 5 2.3 3.5 38 ATV320U07N4C 1.200/ 2.646 1.1 1.5 5 3.8 3.3 5 3 4.5 47 ATV320U11N4C 1.300/ 2.866 1.5 2 6.4 4.9 4.2 5 4.1 6.2 61 ATV320U15N4C 1.300/ 2.866 2.2 3 8.7 6.6 5.7 5 5.5 8.3 76 ATV320U22N4C 2.100/ 4.630 3 4 11.1 8.4 7.3 5 7.1 10.7 94 ATV320U30N4C 2.100/ 4.630 4 5 13.7 10.6 9.2 5 9.5 14.3 112 ATV320U40N4C 2.200/ 4.850 (1) From 5.5kW to 15kW, select the product with the book control block. The external shape of these drives are cubical (see dimension table) the concerned references are ATV320U55N4B, ATV320U75N4B, ATV320D11N4B and ATV320D15N4B. (2) These values are given for a nominal switching frequency of 4 kHz, for use in continuous operation. The switching frequency is adjustable from 2 to16 kHz. Above 4 kHz, derate the nominal drive current. The nominal motor current should not exceed this value. See derating curves. (3) Typical value for a 4-pole motor and a maximum switching frequency of 4 kHz, with no line choke for max. prospective line Isc (4). (4) Nominal supply voltage, min. U1, max. U2: 200 (U1)240 V (U2), 380 (U1)500 V (U2). (5) If line Isc is greater than the values in the table, add line chokes. (6) Drives supplied with category C2 integrated EMC filter. This filter can be disconnected. (7) Drives are supplied with an EMC plate, for assembly by the customer. ATV320_63440_OPF16002 ATV320_63440_OPF16016 ATV320_63440_OPF16018 Presentation: page 60881/2 Dialog, con guration tools: page 60883/2 Combinations: page 60884/2 Dimensions: page 60891/2 60882-EN version: 1.0

Previous Page
Next Page