Altivar 320 Variable Speed Drives Page 60882-3 Variable speed drives

3 References (continued) Variable speed drives Altivar Machine ATV320 Drives with book control block Motor Line supply Altivar Machine ATV320 Power indicated on rating plate (1) Max. line current (2),(3) Apparent power Max. prospec- tive line Isc (4) Max. continuous output current (In) (1) Max. transient current for 60s Power dissipated at maximum output current (In) (1) Reference (1) Weight at U1 at U2 at U2 kW HP A A kVA kA A kg / lb Single-phase supply voltage: 200240 V 50/60 Hz, with integrated EMC filter (3) (5) (6) 0.18 0.25 3.4 2.8 0.7 1 1.5 2.3 25 ATV320U02M2B 2.400/ 5.291 0.37 0.5 6 5 1.2 1 3.3 5 38 ATV320U04M2B 2.500/ 5.511 0.55 0.75 7.9 6.7 1.6 1 3.7 5.6 42 ATV320U06M2B 2.500/ 5.511 0.75 1 10.1 8.5 2 1 4.8 7.2 51 ATV320U07M2B 2.400/ 5.291 1.1 1.5 13.6 11.5 2.8 1 6.9 10.4 64 ATV320U11M2B 2.900/ 6.393 1.5 2 17.6 14.8 3.6 1 8 12 81 ATV320U15M2B 2.900/ 6.393 2.2 3 23.9 20.1 4.8 1 11 16.5 102 ATV320U22M2B 2.900/ 6.393 Three-phase supply voltage: 380500 V 50/60 Hz, with integrated EMC filter (3) (5) (6) 0.37 0.5 2.1 1.6 1.4 5 1.5 2.3 27 ATV320U04N4B 2.500/ 5.511 0.55 0.75 2.8 2.2 1.9 5 1.9 2.9 31 ATV320U06N4B 2.600/ 5.732 0.75 1 3.6 2.7 2.3 5 2.3 3.5 37 ATV320U07N4B 2.600/ 5.732 1.1 1.5 5 3.8 3.3 5 3 4.5 50 ATV320U11N4B 2.500/ 5.511 1.5 2 6.5 4.9 4.2 5 4.1 6.2 63 ATV320U15N4B 2.500/ 5.511 2.2 3 8.7 6.6 5.7 5 5.5 8.3 78 ATV320U22N4B 3.000/ 6.614 3 4 11.1 8.4 7.3 5 7.1 10.7 100 ATV320U30N4B 3.000/ 6.614 4 5 13.7 10.5 9.1 5 9.5 14.3 125 ATV320U40N4B 3.000/ 6.614 5.5 7.5 20.7 14.5 12.6 22 14.3 21.5 233 ATV320U55N4B 7.500/ 16.534 7.5 10 26.5 18.7 16.2 22 17 25.5 263 ATV320U75N4B 7.500/ 16.534 11 15 36.6 25.6 22.2 22 27.7 41.6 403 ATV320D11N4B 8.700/ 19.180 15 20 47.3 33.3 28.8 22 33 49.5 480 ATV320D15N4B 8.800/ 19.401 (1) These values are given for a nominal switching frequency of 4 kHz, for use in continuous operation. The switching frequency is adjustable from 2 to16 kHz. Above 4 kHz, derate the nominal drive current. The nominal motor current should not exceed this value. See derating curves. (2) Typical value for a 4-pole motor and a maximum switching frequency of 4 kHz, with no line choke for max. prospective line Isc (4). (3) Nominal supply voltage, min. U1, max. U2: 200 (U1)240 V (U2), 380 (U1)500 V (U2). (4) If line Isc is greater than the values in the table, add line chokes. (5) Drives supplied with category C2 integrated EMC filter. This filter can be disconnected. (6) Connection in compliance with EMC standards: - ATV320 ppp M2B, ATV320U04N4BATV320U40N4B drives are supplied with an EMC plate. This is integral part of the power terminal; these 2 components cannot be separated. -ATV320U55N4BD15N4B drives are supplied with an EMC plate, for assembly by the customer. ATV320_63440_OPF16028 ATV320_63440_OPF16036 Presentation: page 60881/2 Dialog, con guration tools: page 60883/2 Combinations: page 60884/2 Dimensions: page 60891/2 60882-EN version: 1.0

Previous Page
Next Page