Altivar 320 Variable Speed Drives Page 60882-4 Options

4 References (continued) Variable speed drives Altivar Machine ATV320 Accessories Presentation: page 60881/2 Dialog, con guration tools: page 60883/2 Combinations: page 60884/2 Dimensions: page 60891/2 Accessories Description For use with Minimum order quantity Reference Weight kg / lb Components for mounting GV2 circuit-breaker directly on ATV320 drive Bracket for GV2/ATV320B direct mounting Mechanical bracket for holding the GV2 circuit-breaker in place when directly mounted on ATV320 drive. Requires a GV2AF4 adapter plate for electrical connection, to be ordered separately ATV320 ppp M2B ATV320U02N4B...U40N4B 10 VW3A9921 0.075/ 0.165 Mounting the control module at 90 Adapter plate Provides the electrical link between the GV2 circuitbreaker and ATV320 drive when GV2/ATV320 directly mounted. Requires a VW3A9921 bracket for direct mounting, to be ordered separately. ATV320 ppp M2B ATV320U02N4B...U40N4B 10 GV2AF4 0.016 / 0.035 Mounting the control module at 90 The DC bus is connected in a daisy chain in the following cases: Drives powered by the AC supply with parallel connection of the DC bus in order to balance the loads during braking phases between the drives; used in addition to braking resistors (see page 15) Drives powered by the DC bus only Requires the connection accessories listed below: Description Use Length Sold in lots of Reference Weight From To m/ ft kg / lb Cordset (1) equipped with 2 connectors ATV320 pppp M2B ATV320 pppp M2B 0.1/ 0.33 5 VW3M7101R01 ATV320 pppp N4B ATV320 pppp N4B Shielded cable ATV320 pppp M2B ATV320 pppp M2B 15/ 49.21 1 VW3M7102R150 ATV320 pppp N4B ATV320 pppp N4B Connection kit for VW3M7102R150 cable 10 VW3M2207 (1) Setting up several devices on the DC bus requires special precautions; please refer to the installation manual available on our website www.schneider-electric.com. Shielding connection clamp Description For use with Sold in lots of Reference of lot Weight kg / lb Shielding connection clamps Attachment and earthing of the cable shielding Pack of 25 clamps including: 20 clamps for 4.8 mm cable 5 clamps for 7.9 mm cable ATV320 pppppp 25 TM200RSRCEMEC DIN rail mounting kit Description For use with Reference Weight kg / lb Plates for mounting on DIN rail width 35 mm ATV320U02M2C...ATV320U22M2C VW3A9804 0.290/ 0.639 ATV320U02M4C...ATV320U15M4C VW3A9805 0.385/ 0.849 UL Type 1 conformity kits Description For use with Reference Weight kg / lb UL Type 1 conformity kits Mechanical device for xing to the lower part of the drive. For direct connection of cables to the drive via tubes or cable glands. ATV320U02M2CU07M2C VW3A95811 ATV320U11M2C...U22M2C ATV320U04NAC...U15N4C VW3A95812 ATV320U22N4C...U40N4C VW3A95814 ATV320U55N4B, U75N4B VW3A95817 ATV320D11N4B, D15N4B VW3A95819 60882-EN version: 1.0

Previous Page
Next Page