Altivar Process 600 Variable Speed Drives Page 19 Specifications

19 Altivar Process 600 variable speed drives I/O and Control Specifications Specifications Analog input AI1, AI2, AI3 Software-configurable V/A : voltage or current analog input Voltage analog input 0...10 Vdc, impedance 30 k W , Current analog input X-Y mA by programming X and Y from 0...20 mA, with impedance 250 W Maximum sampling time: 5 ms 1 ms Resolution 12 bits Accuracy: 0.6% for a temperature variation of 60C Linearity 0.15% of maximum value Software-configurable for sensor inputs: PT1000 or KTY84 or PTC or Water level sensor PT100 v 1 or 3 thermal sensors mounted in series (configurable by software) v Sensor current: 5 mA v Range -20/200C v Accuracy +/- 4C for a temperature variation of 60C PT1000 v 1 or 3 thermal sensors mounted in series (configurable by software) v Thermal sensor current: 1 mA v Range -20/200C v Accuracy +/- 4C for a temperature variation of 60C KTY84 v 1 thermal sensor v Thermal sensor current: 1 mA v Range -20/200C v Accuracy +/- 4C for a temperature variation of 60C PTC v 6 sensors maximum mounted in series v Sensor current: 1 mA v Nominal value: < 1.5 k W v Overheat trigger threshold: 3 k W v Overheat reset threshold: 1.8 k W v Protected for low impedance < 50 W Water Level Sensor v Sensitivity: 0...1 M W , adjustable by software v Water level sensor current: 0.3 mA...1 mA maximum v Adjustable delay: 0...10 s Analog I/O Common COM 0 V for analog inputs Other inputs Available on I/O option cards Analog output AQ1, AQ2 AQ: Analog output software-configurable for voltage or current Voltage analog output 0...10 Vdc, minimum. Minimum load impedance 470 W , Current analog output X-Y mA by programming X and Y from 0...20 mA, maximum load impedance 500 W Maximum sampling time: 10 ms 1 ms Resolution 10 bits Accuracy: 1% for a temperature variation of 60C Linearity 0.2% Analog I/O Common COM 0 V for analog outputs I/O and Control Specifications Description Terminal Electrical Characteristics Available internal supplies for analog inputs 10 V, 24 V Output supply for Analog Input: 10 V 1 0.5 Vdc Tolerance 5% Current: maximum 10 mA Short circuit protected 24 V +24 Vdc Tolerance: minimum 20.4 Vdc, maximum 27 Vdc Current: maximum 200 mA for both 24 Vdc terminals Terminal protected against overload and short-circuit In Sink Ext position, this supply is powered by external PLC supply For external + 24 V power supply P24 External input supply +24 Vdc Tolerance: minimum 19 Vdc, maximum 30 Vdc Current: maximum 1.25 A 0 V 0 V for P24

Previous Page
Next Page