Altivar Process 600 Variable Speed Drives Page 35 Accessories and Options

35 Altivar Process 600 variable speed drives Accessories & Options Communication Networks Communication buses and networks Altivar Process drives have 3 built-in RJ45 communication ports as standard: 1 Ethernet port 2 serial ports Integrated communication protocols Altivar Process drives integrate the Modbus TCP and Modbus serial link communication protocols as standard. Ethernet port This offers standard services regularly used in industrial networks: Modbus TCP message handling is based on the Modbus protocol and is used to exchange process data with other network devices (e.g., a PLC). It provides Altivar Process drives with access to the Modbus protocol and to the high performance of the Ethernet network, which is the communication standard for numerous devices. SNMP (Simple Network Management Protocol) offers standard diagnostics services for network management tools. The FDR (Fast Device Replacement) service allows automatic reconfiguration of a new device installed to replace an existing device. Possibility to reinforce device security by disabling some unused services as well as managing a list of authorized devices. Setup and adjustment tools (SoMove, Unity with DTM) can be connected locally or remotely. The embedded Web server is used to display operating data and dashboards as well as configure and diagnose process elements from any web browser. - These numerous services offered by the Ethernet port mean that Altivar Process drives can be integrated into Schneider Electric solutions. Serial ports One port dedicated to field network operation for exchanging data with other devices via the Modbus protocol A second dedicated port for the multidrop connection of the following HMIs and configuration tools: - the remote graphic display terminal supplied with the drive - a Magelis industrial HMI terminal - a PC with SoMove or Unity setup software The detailed specifications for the Ethernet or serial communication ports, and the Modbus and Modbus TCP protocols are available on our website Description 1 RJ45 Ethernet port 2 RJ45 serial port 3 Slot A for I/O expansion or communication cards 4 Slot B for I/O expansion cards 5 Removable screw terminal blocks for 24 V c power supply and integrated I/O 6 RJ45 serial link for HMI (remote graphic display terminal, Magelis terminal, etc.) Altivar Process drives can only take one communication card, in slot A 3 only. They cannot take 2 cards of the same type (e.g., 2 logic and analog I/O cards or 2 relay output cards). The drives can take one logic and analog I/O card and one relay output card in either slot A 3 or slot B 4. Note: The user manuals and description files (gsd, eds, xif) for devices on the communication buses and networks are available on our website www.schneider- 1 2 3 4 5 6 PF140354

Previous Page
Next Page