Home / altivar-process-900-variable-speed-drives / Page 29

Altivar Process ATV900 variable speed drives - Altivar Process 900 Variable Speed Drives Page 29

29

Presentation, references

Variable speed drives

Altivar Process ATV900

Option: Configuration and runtime tools

Accessories for graphic display terminal

b Remote mounting kit for mounting on enclosure door with IP 65 degree of protection as standard The kit comprises: - Tightening tool (also sold separately under the reference ZB5AZ905) 1 Cover plate to maintain IP 65 protection when there is no terminal connected 2 Mounting plate 3 RJ45 port for the graphic display terminal 4 Seal 5 Fixing nut 6 Anti-rotation pin 7 RJ45 port for connecting the remote-mounting cordset (10 m/ 32.81 ft maximum) Cordsets should be ordered separately depending on the length required 8 Grounding connector Drilling a hole with a standard 22 tool, as used for a pushbutton, allows the unit to be mounted without needing a cut-out in the enclosure ( 22.5 mm/ 0.89 in. drill hole). References

Description Length m/ ft IP Reference Weight kg/ lb Remote mounting kit Order with remote-mounting cordset VW3A1104R ppp 65 VW3A1112 Tightening tool for remote mounting kit ZB5AZ905 0.016/ 0.035 Remote-mounting cordset equipped with 2 RJ45 connectors 1/ 3.28 VW3A1104R10 0.050/ 0.110 3/ 9.84 VW3A1104R30 0.150/ 0.331 5/ 16.40 VW3A1104R50 0.250/ 0.551 10/ 32.81 VW3A1104R100 0.500/ 1.102 USB/Mini B USB cable for connecting the display terminal to a PC TCSXCNAMUM3P IP 65 remote mounting kit for Ethernet port (1) 22 RJ45 female/female adapter with seal 65 VW3A1115 0.200/ 0.441 Set of 10 x IP55 shutters for ATV650: to keep IP55 protection level when the graphic display terminal is removed 55 VW3A1116 0.640/ 1.411

Multidrop connection accessories

These accessories are used to connect a graphic display terminal to several drives via a multidrop link. This multidrop connection uses the RJ45 terminal port on the front of the drive. Connection accessories

Description Sold in lots of Unit reference Weight kg/ lb Modbus splitter box 10 RJ45 connectors and 1 screw terminal block LU9GC3 0.500/ 1.102 Modbus T-junction boxes With 0.3 m/ 0.98 ft integrated cable VW3A8306TF03 0.190/ 0.419 With 1 m/ 3.28 ft integrated cable VW3A8306TF10 0.210/ 0.463 Modbus line terminator For RJ45 connector R = 120 C = 1 nf 2 VW3A8306RC 0.010/ 0.022

Cordsets (equipped with 2 RJ45 connectors)

Used for Length m / ft Reference Weight kg/ lb Serial link 0.3/ 0.98 VW3A8306R03 0.025/ 0.055 1/ 3.28 VW3A8306R10 0.060/ 0.132 3/ 9.84 VW3A8306R30 0.130/ 0.287 (1) Used to connect a remote PC to the RJ45 port on an IP 21 drive mounted in an enclosure or on a wall. Drill hole with a standard 22 tool, as used for a pushbutton. (Requires a remote-mounting cordset VW3A1104R p 0 p equipped with 2 RJ45 connectors). Remote mounting kit for mounting graphic display terminal on enclosure door (front panel) 1 3 2 4 Remote mounting kit for graphic display terminal (rear panel) 1 4 5 6 7 2 8 Presentation: page 8 Variable speed drives: page 18 Combinations: page 32 Communication buses and networks: page 40 Dimensions: page 76

Previous Page
Next Page