Home / modicon-m221-plc / Page 20

Modicon M221 Plc - Page 20 References

20

References

Remote graphic display unit, mounting accessories, cable

Designation Description Unit reference Weight kg /lb Remote graphic display unit v For data display and modification (1) v Contains 1 bezel key ZB5AZ905 TMH2GDB 0.170 0.37 Tightening tool For tightening the cover on 22 mm unit ZB5AZ905 0.016 0.04 Mounting plate for 5 symmetrical rail (Sold in lots of 4) For clipping onto 35 mm (1.378 in.) symmetrical rail (1 hole 22 mm (0.87 in.) ) A9A15151 0.040 0.09 Metal bracket for panel mounting, threaded (Sold in lots of 10) 1 hole 22 mm (0.87 in.) Mounted using 2 screws, 7 mm (0.28 in.) diameter DX1AP52 0.065 0. 014 Connecting cables Used between TMH2GDB remote display unit and M221/ M221 Book logic controller Equipped with an RJ 45 connector at each end Length: 2.5 m (8.2 ft) XBTZ9980 0.230 0.51 Equipped with an RJ 45 connector at each end Length: 1 m (3.28 ft) VW3A1104R10 0.050 0.110

Option

Industrial SD memory card Application backup and program transfer Capacity: 256 MB TMASD1 0.004 0.009

Separate parts

Designation Description Unit reference Weight kg /lb Mounting kit Sold in lots of 10 For plate or panel mounting of M221 and M221 Book controllers TMAM2 0.065 0.143

Replacement parts

Designation Description Reference Weight kg /lb Set of terminal blocks for connecting the power supply on M221 and M221 Book logic controllers 8 removable screw terminal blocks TMAT2PSET 0.127 0.280 Set of terminal blocks for connecting the I/O on M221 controllers Removable screw terminal connectors: 8 different connectors for equipping a TM221C pppp logic controller (8 x I/O) TMAT2CSET 0.127 0.280 Set of terminal blocks for connecting the I/O on M221 Book controllers 4 x 10-way and 4 x 11-way removable terminal blocks with screw terminals TMAT2MSET 0.127 0.280 4 x 10-way and 4 x 11-way removable terminal blocks with spring terminals TMAT2MSETG 0.127 0.280 Set of battery holders 2 spare battery holders for M221 and M221 Book controllers TMAHOL02 0.130 0.286 Backup battery The battery supplied with each controller is not available as a spare part in the Schneider catalog. If a replacement part is needed, use a Panasonic battery type BR2032 only. (1) Compatible only with M221 and M221 Book logic controllers whose firmware is version V1.3 or later. HMI pages can be configured with SoMachine Basic from version V1.3.

References

Modicon M221 and M221 Book logic controllers

Options, separate parts

TMH2GDB TMASD1 A9A15151 ZB5AZ905 XBTZ9980 DX1AP52 TMAHOL02

Previous Page
Next Page