Modicon M580 Plc Page 1-31 Presentation

1/31 Description (continued) Modicon M580 automation platform M580 backplanes Description (continued) Dual power supply backplanes BMEXBP0602 is 6-slot dual Ethernet and X-bus backplane with: 1 2 CPS slots for BMXCPS4002 p redundant power supply only 2 6 slots with: 2a 6 Ethernet and X-bus connectors for mixed modules 3 Expansion: 1 connector for an X-bus backplane expansion 4 2 attachment points for mounting the shielding connection bar 5 Grounding screw 6 Slots for anchoring the module pin 7 Tapped holes for the locking screw on each module 8 4 holes for M4, M5, M6, or UNC #6-32 screws (4.32 to 6.35 mm/ 0.170 to 0.250 in. ) 9 Rack is fastened to 35 mm/ 1.38 in. wide and 15 mm/ 0.59 in. deep DIN rails. Mounting on a 35 mm/ 1.38 in. wide and 7.5 mm/ 0.295 in. deep DIN rail is possible (in this case, the product withstands less mechanical stress) BMEXBP1002 is a 10-slot dual Ethernet and X-bus backplane with: 1 2 CPS slots for BMXCPS4002 p redundant power supply only 2 10 slots with: 2a 8 Ethernet and X-bus connectors for mixed modules 2b 2 X-bus connectors for X-bus modules 3 Expansion: 1 connector for an X-bus backplane expansion 4 2 attachment points for mounting the shielding connection bar 5 Grounding screw 6 Slots for anchoring the module pin 7 Tapped holes for the locking screw on each module 8 4 holes for M4, M5, M6, or UNC #6-32 screws (4.32 to 6.35 mm/ 0.170 to 0.250 in. ) Cable shielding connection kit To be ordered separately: A BMXXSP pp 00 cable shielding connection kit, used to help protect against electrostatic discharge when connecting the shielding on cordsets for connecting: b Analog, counter, and motion control modules b Some Magelis HMI terminals (1) to the processor (via BMXXCAUSBH0 pp shielded USB cable) The BMXXSP pp 00 shielding connection kit comprises: 9 Metal bar that takes the clamping rings and the earthing terminal 10 2 sub-bases to be mounted on the rack 11 Grounding terminal 12 Not included in the shielding connection kit, the STBXSP30 p 0 clamping rings (sold in lots of 10, cross-section 1.56 mm 2 / AWG 16...10 or 511 mm 2 / AWG 10...8 ) (1) Please refer to the HMI catalogs on www.schneider-electric.com. 10 9 12 11 10 BMXXSP pp 00 cable shielding connection kit 8 2a 2b 3 6 4 2 1 1 5 4 BMEXBP1002 backplane 7 8 2a 3 6 4 2 1 1 5 4 BMEXBP0602 backplane 7 2 1 3 4 5 6 7 8 9 10 2 1 3 4 5 6 7 8 9 10

Previous Page
Next Page