Modicon M580 Plc Page 2-13 I/O architectures

2/13 Presentation, description Modicon M580 automation platform Modicon X80 NRP EIO drop fiber optic repeaters, Ethernet network option switch Modicon X80 EIO drop fiber optic repeaters (1)(2) Presentation BMXNRP0200/0201 fiber optic repeaters are an alternative to the use of ConneXium managed dual ring switches (DRSs) for fiber optic communications over long distances in Ethernet I/O (EIO) systems. When inserted in Modicon X80 RIO drops, BMXNRP0200/0201 fiber optic repeaters make it possible to: b Extend the total distance of the EIO network when EIO drops are located in areas of the factory more than 100 m/ 328.084 ft away b Enhance immunity to noise b Resolve difference of potential between remote sites b NRP repeaters can be installed on the primary ring or on secondary rings. These modules cannot, however, be used to connect secondary rings to the primary ring. b The BMXNRP0200 repeater for multimode optical fiber allows remote location up to 2 km/ 1.243 mi . The BMXNRP0201 repeater or single-mode optical fiber allows remote location up to 16 km/ 9.942 mi . Depending on the configuration, the NRP repeater may be linked to the CRA adapter of the drop where it is installed, via 1 or 2 Ethernet Interlink cables. Description 1 Module reference 2 Display block indicating the module status 3 RJ45 Ethernet ports; 2 LEDs, LNK and ACT, indicate the status of each port 4 Fiber optic ports with SFP transceiver for LC type connector Ethernet network option switch Presentation The Ethernet network option switch BMENOS0300 is an economic alternative to external DRSs for copper Ethernet communication over short distances. Based on the rotary switches on the front panel, the application of the 2 device network ports can be configured intuitively as: b RIO ring b DIO ring b DIO ports Depending on the architecture, the BMENOS0300 switch can be used to communicate with the distributed I/O by simply inserting it in the local main rack or remote drops. Description 1 Module reference 2 Display block indicating the module status 3 Rotary switch for configuring the ETH 1 service port 4 Rotary switch for configuring the 2 device network ports (ETH 2 and ETH 3) 5 ETH 1: Service port (Ethernet) 6 ETH 2/ ETH 3: Device network port (Ethernet) (1) For additional characteristics, see our website www.schneider-electric.com. (2) Requires Unity Pro Extra Large software u V8.0. BMXNRP020 p 2 3 4 1 Processors: page 1/20 Ruggedized Modicon M580 modules: page 4/2 1 2 3 4 5 6 BMENOS0300 2 1 3 4 5 6 7 8 9 10 2 1 3 4 5 6 7 8 9 10

Previous Page
Next Page