Modicon M580 Plc Page 5-2 Standards and certifications

5/2 Standards and certifications The Modicon M580 automation platform has been developed to comply with the principal national and international standards concerning electronic equipment for industrial automation systems. b Requirements specific to programmable controllers: functional characteristics, immunity, resistance, safety, etc.: IEC/EN 61131-2 and IEC/EN 61010-2-201 , UL and CSA standards for industry ( UL 61010-2-201, CSA C22.2 No. 61010-2-201 ) b Requirements specific to power utility automation systems: IEC/EN 61850-3 b Merchant navy requirements of the major international organizations: unified in IACS (International Association of Classification Societies) b Compliance with European Directives for e marking: v Low Voltage: 2006/95/EC and 2014/35/EU from April 2016 v Electromagnetic Compatibility: 2004/108/EC and 2014/30/EU from April 2016 b Ex areas: v For USA and Canada: Hazardous location class I, division 2, groups A,B,C, and D v For other countries: e ATEX (directive 94/9/EC and 2014/34/EU from April 2016) or IECEx in defined atmosphere Zone 2 (gas) and/or Zone 22 (dust) Up-to-date information on which certifications have been obtained is available on our website. M580 PACs are considered as open equipment and are designed for use in industrial environments, in pollution degree 2, overvoltage category II (IEC 60664-1), and in low-voltage installations, where the main power branch is protected on both wires by devices such as fuses or circuit breakers limiting the current to 15A for North America and 16A for the rest of the world. Protective treatment of the Modicon M580 automation platform The Modicon M580 platform meets the requirements of TC treatment (Treatment for all Climates) . For installations in industrial production workshops or environments corresponding to TH treatment (treatment for hot and humid environments) , Modicon M580 must be embedded in enclosures with minimum IP 54 protection. The Modicon M580 automation platform offers protection to IP 20 level and protection against pins (enclosed equipment) (1) . They can therefore be installed without an enclosure in reserved-access areas which do not exceed pollution level 2 (control room with no dust-producing machine or activity). Pollution level 2 does not take account of more severe environmental conditions: air pollution by dust, smoke, corrosive or radioactive particles, vapors or salts, mold, insects, etc. (1) In cases where a position is not occupied by a module, a BMXXEM010 protective cover must be installed. ( e ) : Tests required by European directives ( e ) and based on IEC/EN 61131-2 standards. Standards and certifications Modicon M580 automation platform Standards, certifications, and environmental conditions Characteristics Service conditions and recommendations relating to the environment Modicon M580 automation platform Modicon M580 harsh automation platform Temperature OperationC 0...+ 60 - 25...+ 70 StorageC - 40...+ 85 - 40...+ 85 Relative humidity (without condensation) Cyclical humidity % + 5 ... + 95 up to 55 C + 5 ... + 95 up to 55 C Continuous humidity % + 5 ... + 93 up to 55 C + 5 ... + 93 up to 60 C Altitude Operation m 02,000 (full specification: temperature and isolation) 2,000 ... 5,000 (temperature derating: 1 C/400 m, isolation lost: 150 V c /1,000 m) Supply voltage Nominal voltage Modicon X80 I/O power supply modules BMXCPS2010 BMXCPS3020 BMXCPS3020H BMXCPS3540T BMXCPS2000 BMXCPS3500 BMXCPS3500H BMXCPS4002 BMXCPS4002H V 24 c 24...48 c 125 c 100...240 a 100...240 a 100...240 a Limit voltages V 18...31.2 c 18...62.4 c 100150 c 85...264 a 85...264 a 85...264 a Nominal frequencies Hz 50/60 Limit frequencies Hz 47/63 2 1 3 4 5 6 7 8 9 10 2 1 3 4 5 6 7 8 9 10

Previous Page
Next Page