Modicon Quantum Automation Platform Page 2-15 I/O architectures and Hot Standby architectures

2/15 CRP Ethernet head adaptors and CRA Ethernet drop adaptors (1)(2) Presentation A Quantum Ethernet I/O architecture with Ethernet RIO drops requires the use of CRP and CRA Ethernet adaptors: b 140CRP31200 head adaptor installed in the Quantum local rack b 140CRA31200 drop adaptor installed in each Quantum Ethernet RIO drop Each of these adaptors is connected by Ethernet cables equipped with RJ45 connectors. The dual Ethernet network connection port on each adaptor allows Daisy Chain Loop connections using the RSTP protocol ( Rapid Spanning Tree Protocol ). Each adaptor uses one slot in the Quantum rack. These adaptors are also offered in Conformal coating version for harsh environments (see page 8/2). Capacity of Quantum Ethernet I/O architectures, with Quantum RIO drops b 1 Quantum CPU drop equipped with a 140CPU6 pppp type CPU that can have one primary rack and one secondary rack (4) b Up to 31 Quantum Ethernet RIO drops, limited to a maximum of 31 RIO drops (Quantum + Modicon X80) (3) ; each Quantum CPU drop can comprise one primary rack and one secondary rack (4) b Distance: v 100 m between drops (copper medium) v 2 km between each 140NRP31200, BMXNRP0200 and ConneXium managed switch, with a multimode optical fibre cable (5) v 16 km between each 140NRP31201, BMXNRP0201 and ConneXium managed switch, with a single mode optical fibre cable (5) b Up to 15 ConneXium managed switches (6) b 1 secondary ring level per ConneXium managed switch b Up to 128 Ethernet DIO devices per 140NOC78000 Ethernet head adaptor b Up to 64 Ethernet DIO devices per 140NOC78100 Ethernet head adaptor with integrated router function Description 1 Display block indicating the module status 2 On 140CRA31200 adaptor: rotary switches for addressing Ethernet RIO drops (00159) 3 Dedicated RJ45 SERVICE port for remote service tools such as a PC with Unity Pro (7), network diagnostics software (ConneXium Network Manager, etc.) or with network analysis tools (Port Mirroring, etc.), or an HMI terminal, etc. This port can also be used to connect Ethernet DIO devices such as Modicon ETB I/O, Altivar variable speed drives, TeSys T motor protection, etc. (8) . 4 RJ45 INTERLINK port on 140CRP31200 adaptor for connecting the Ethernet Interlink cable 5 RJ45 DEVICE NETWORK port for connection to the Ethernet network 6 RJ45 DEVICE NETWORK port for connection to the Ethernet network 7 Removable hinged door (1) For additional characteristics, see our website www.schneider-electric.com. (2) Requires Unity Pro Extra Large software u V7.0. (3) 140CPU67060 models support Modicon X80 RIO drops only and a maximum of 6 drops, 140CPU67160 models support a maximum of 16 Modicon X80 RIO drops. (4) Requires two 140XBE10000 rack expansion modules (one in the primary rack and one in the secondary rack) and a 140XCA7170 p extension cable (1, 2 or 3 m) for connecting these two modules. See page 2/23. (5) See page 2/18. (6) Each ConneXium switch counts as two Ethernet RIO drops. (7) To connect Unity Pro to the SERVICE port, the 140NOC78000 Ethernet DIO head adaptor or 140NOE771 p 1 Ethernet module and the Ethernet Interlink cable must be used. See page 2/16. (8) Please refer to the relevant product catalogues on our website www.schneider-electric.com. 1 3 4 5 6 7 140CRP31200 2 140CRA31200 Description Modicon Quantum automation platform Quantum Ethernet I/O CRP Ethernet head adaptor Quantum CRA Ethernet drop adaptor Overview: page 2/6 Presentation: page 2/10 Architectures: page 2/19 References: page 2/22 2 1 3 4 5 6 7 8 9 10 2 1 3 4 5 6 7 8 9 10

Previous Page
Next Page