Modicon X80 IO Platform Page 3-19 I/O modules

3/19 Description Modicon X80 I/O platform Analog I/O modules Description BMXAM p /ART analog I/O modules are standard format (1 slot). They have a case, which provides IP 20 protection of the electronics, and are locked into position by a captive screw. I/O modules connected via 20 or 28-way removable terminal block BMXAM p analog I/O modules feature the following: 1 A rigid body providing support and protection for the electronic card 2 A module reference marking (a label is also visible on the right-hand side of the module) 3 A module and channel status display block 4 A connector taking the 20 or 28-way removable screw or spring-type terminal block for directly connecting the sensors or preactuators to the module To be ordered separately: 5 A BMXFTB20 p 0 or BMXFTB28 p 0 20 or 28-way removable terminal block (referencing label supplied with each I/O module) or pre-wired cables with: - A 20-way terminal block at one end and flying leads at the other ( BMXFTW p 01S ) - A 28-way terminal block at one end and flying leads at the other ( BMXFTW p 08S ) - A 20 or 28-way terminal block and a 25-way SUB-D connector ( BMXFCA pp 0 or BMXFTA pp 0 ), for connection to Modicon Telefast ABE7 sub-bases (see page 3/23). I/O modules connected via 40-way connector BMXART analog input modules have the following on the front panel: 1 A rigid body providing support and protection for the electronic card 2 A module reference marking (a label is also visible on the right-hand side of the module) 3 A module and channel status display block 4 One (or two) 40-way connector(s) for connecting the sensors To be ordered separately: 5 Pre-wired cables with: - A 40-way connector at one end and flying leads at the other ( BMXFCW p 01S ) - A 40-way connector and a 25-way SUB-D connector ( BMXFCA pp 2) for direct connection to the Modicon Telefast ABE7 sub-bases (see page 3/23) Must be ordered separately: b A shielding connection kit to help protect against electrostatic discharge, consisting of a metal bar and two sub-bases for mounting on the rack supporting the analog modules b A set of STBXSP3020 clamping rings for the shielding braids of analog signal cables 1 3 4 2 5 Module for connection via 20 or 28-way removable terminal block 1 3 4 2 5 Module for connection for 40-way connector Compatibility: page 1/6 Racks and power supply modules: page 2/2 Communication: page 4/8 Ruggedized modules: page 5/2 2 1 3 4 5 6 7 8 9 10 2 1 3 4 5 6 7 8 9 10

Previous Page
Next Page