Modicon X80 IO Platform Page 4-12 Communication

4/12 Le Presentation (continued) The BMXNOR0200H communication module integrates the RTU (Remote Terminal Unit) functions and protocols in the Modicon X80 I/O platform for industrial Telemetry applications and other widely distributed infrastructures. The BMXNOR0200H module can be used to connect an RTU X80 I/O PLC directly to a Telemetry supervisor or to other RTU stations, via the standard DPN3 protocols (subset level 3) or IEC 60870-5-101/104 with different connection methods: Ethernet TCP/IP, LAN, WAN, serial link, or modem connections (radio, PSTN, GSM, GPRS/3G, ADSL). The BMXNOR0200H module is designed to operate in a harsh environment (conformal coating), in an extended temperature range (-25 to +70 C/ -13 to +158 F ). Functions The BMXNOR0200H module offers the following functions: b Upstream RTU communication to the SCADA (server or slave mode) b Downstream RTU communication to field devices (master mode) b RTU protocols: Time synchronization, exchanges of time and date stamped data via polling (on change of state and unsolicited), management of time and date stamped events b Application Data Logging with time and date stamping in the module Flash memory card b Event notifications via e-mail or SMS b Embedded Web server for setting the RTU protocol parameters, diagnostics, and monitoring b Communications on Ethernet port: v 10BASE-T/100BASE-TX physical interface v Modbus/TCP protocol (client and server) v Integrated RTU protocols for Ethernet communications: DNP3 IP (client or server) and IEC 60870-5-104 (over IP) (client or server) v Connection of ADSL external modem on the Ethernet port, via the PPPoE (Point-to-Point Protocol over Ethernet) protocol v Advanced Ethernet functions: NTP client, FTP client or server, HTTP server, SOAP/XML server, SNMP agent, SMTP agent b Communications on serial port: v Isolated RS232/RS485 point-to-point serial links v Integrated RTU protocols for serial and modem communications: IEC 60870-5-101 (master or slave) and DNP3 serial (master or slave) v Connection of external modems (radio, PSTN, GSM, GPRS/3G) via the PPP (Point-to-Point Protocol) protocol Description The BMXNOR0200H module can be installed in either a standard or ruggedized configuration, equipped with a standard BMXP34 ppppp /BMEP58 pppp or ruggedized BMXP34 ppppp H/BMEP58 pppp H processor. The front panel of the BMXNOR0200H module features: 1 A screw for locking the module in a slot in the rack 2 A display block with 8 LEDs, 4 of which relate to the serial and Ethernet communication ports 3 A slot for a Flash memory card (SD card), with protective cover 4 An RJ45 connector for the connection to the Ethernet network 5 An RJ45 connector for connection of the serial link or an external modem On the rear panel, 2 rotary switches for selecting the IP address assignment method for the module. Modicon X80 I/O platform RTU communication module Presentation (continued) , functions, description 5 3 1 2 4 Compatibility: page 1/6 Racks and power supply modules: page 2/2 I/O modules: page 3/2 Ruggedized modules: page 5/2 2 1 3 4 5 6 7 8 9 10 2 1 3 4 5 6 7 8 9 10

Previous Page
Next Page