Home / modicon-x80-io-platform / Page 5-5

Communication - Modicon X80 IO Platform Page 5-5

5/5

Presentation, description, references

Modicon X80 I/O platform

Modicon X80 NRP EIO drop fiber optic repeaters, NOS Ethernet network option switch

Modicon X80 EIO drop fiber optic repeaters

(1)(2) Presentation BMXNRP0200/0201 fiber optic repeaters offer an alternative to the use of ConneXium managed dual ring switches (DRS), for fiber optic communications over long distances in Ethernet I/O systems. When inserted in Modicon X80 EIO drops, BMXNRP0200/0201 fiber optic repeaters make it possible to: b Extend the total distance of the EIO network when EIO drops are located in areas of the factory more than 100 m/ 328 ft away b Enhance immunity to noise b Resolve grounding incompatibilities between sites with different grounding methods NRP repeaters can be installed on the primary ring or on secondary rings. These modules cannot, however, be used to connect secondary rings to the primary ring. The BMXNRP0200 repeater for multimode optical fiber allows remote location up to 2 km/ 1.25 mi . The BMXNRP0201 repeater or single-mode optical fiber allows remote location up to 16 km/ 9.94 mi . Depending on the configuration, the NRP repeater may be linked to the CRA adapter of the drop where it is installed, via 1 or 2 Ethernet Interlink cables. Description 1 Module reference 2 Display block indicating the module status 3 RJ45 Ethernet ports. 2 LEDs, LNK and ACT, indicate the status of each port 4 Fiber optic ports with SFP transceiver for LC type connector

References

(1) Modicon X80 EIO drop fiber optic repeaters (2)

Description Optical fiber Reference Weight kg/ lb Modicon X80 EIO drop iber optic repeaters Multimode BMXNRP0200 Single-mode BMXNRP0201

Ethernet network option switch

Presentation The BMENOS0300 Ethernet network option switch offers an economic alternative to external DRSs for copper Ethernet communication over short distances. Based on the rotary switches on the front panel, the application of the 2 device network ports can be configured intuitively as: b RIO ring b DIO ring b DIO ports Depending on the architecture, the BMENOS0300 switch can be used to communicate with the distributed I/O by simply inserting it in the local main rack or remote drops. Description 1 Module reference 2 Display block indicating the module status 3 Rotary switch for configuring the ETH 1 service port 4 Rotary switch for configuring the 2 device network ports (ETH 2 and ETH 3) 5 ETH 1: Service port (Ethernet) 6 ETH 2/ ETH 3: Device network port (Ethernet)

References

(1) Ethernet network option switch

Description SERVICE port Device network port (Ethernet) Reference Weight kg/ lb Ethernet network option switch 1 2 BMENOS0300 (1) For additional characteristics, see our website www.schneider-electric.com. (2) Requires Unity Pro Extra Large software u V7.0, see our website www.schneider-electric.com. BMXNRP020 p 2 3 4 1 Compatibility: page 1/8 Racks and power supply modules: page 2/2 I/O modules: page 3/2 Communication: page 5/8 Ruggedized modules: page 6/2 1 2 3 4 5 6 BMENOS0300

2 1 3 4 5 6 7 8 9 10 2 1 3 4 5 6 7 8 9 10

Previous Page
Next Page